NorthWest Copper drills 110.0 metres of 1.86% CuEq, 0.64% Copper and 1.10 g/t gold in Western Zone at Kwanika Project, British Columbia

NorthWest Copper Corp. [TSXV: NWST] reported assay results from three additional drill holes in the Western Zone at its 100%-owned Kwanika Project in British Columbia. These holes form part of the company’s recently completed 2026 drill program, which comprised 43 holes totalling 12,291 metres.

The results achieved the program’s main objectives by confirming geological and grade continuity across the Western Zone while reducing drill hole spacing to approximately 50 metres to support increased confidence in the classification of future mineral resource updates.

The results demonstrate strong copper-gold mineralization over significant widths in the Western Zone. Highlights include drill hole K-26-346, which intersected 110.0 metres (estimated true width of 84.3 metres) grading 0.64% copper and 1.10 g/t gold (1.86% copper equivalent (CuEq)), including 39.8 metres grading 2.53% CuEq and 16.1 metres grading 4.37% CuEq.

The drilling also incrementally extended higher grade mineralized Unit 1 up-dip and confirmed persistent palladium enrichment in higher-grade Unit 2. Importantly, drilling intersected a new mineralized structure above previously defined mineralized zones, grading 1.07% CuEq over 30 metres, and identified an additional primary porphyry mineralized zone immediately below previously defined mineralized structures, highlighting further expansion potential at Kwanika.

Western Zone Drill Hole Highlights: K-26-346: 110.0 metres of 0.64% Cu and 1.10 g/t Au (1.86% CuEq) from 378.0 metres.

K-26-259: 115.1 metres of 0.42% Cu and 0.69 g/t Au (1.19% CuEq) from 406.9 metres.

K-26-264: 50.9 metres of 0.38% Cu and 0.73 g/t Au (1.19% CuEq) from 487.0 metres.

Paul Olmsted, CEO of NorthWest stated: “These results continue to demonstrate the consistency and quality of the Kwanika mineralized system with additional expansion potential opportunities identified. With results now reported from 14 of the 43 holes completed in the 2026 program, we are making meaningful progress toward increasing confidence in the classification of the existing mineral resource while identifying prospects to create additional value through refinements of known mineralized structures.

“The broad distribution of mineralization across the Pit, North Pit Extension and Western Zones reinforces our belief in the scale and potential of the Kwanika system. We look forward to reporting the remaining assay results and assessing their potential impact on the ongoing work on the Preliminary Economic Assessment.”

With the three holes reported in this release, the Company has now reported results from 14 of the 43 holes completed during the 2026 Kwanika drill program, which totaled 12,291 metres. 351325 E) containing the holes reported in this release.

Geoff Chinn, VP Business Development and Exploration added: “The three new holes on Section 351325 E succeeded in improving the grade and geological continuity of the Western Zone, while reducing drill hole spacing to about 50 metres. The geology model is performing well in the context of this new information. We are excited by the unexpected intersection above Unit 1 in hole K-26-264 and the new information it provides on the northern portion of the Western Zone. Equally positive are the extension of mineralization below Unit 2 in K-26-346 and the up-dip extension of Unit 1, as well as the persistence of palladium in Unit 2 down-dip. These results strengthen our understanding of the Western Zone and highlight opportunities to extend mineralization.”

The holes were designed to infill an area previously tested by low angle to mineralization to improve geological and grade continuity by reducing drill hole spacing to approximately 50 metres to support Indicated classification. A summary of the geological aspects of holes is presented below.

Western Zone: Hole K-26-259 was drilled with HQ to 201 metres and NQ-sized core and sampled on 2-metre intervals from half sawn core and drilled on 0° azimuth at a -90° dip to a depth of 576 metres.

After 24 metres of overburden the hole intersected post-mineralization Cretaceous sediments to 369 metres then a maroon-green hematite altered tectonic breccia to 375 metres, and a hematite-chlorite altered maroon porphyritic monzodiorite dyke to 407 metres.

This was followed by a mineralized light beige potassic altered and fractured porphyritic monzonite with dismembered early quartz veins to 530 metres (Comps 1, 2, and 3). Higher-grade Au Unit 2 is identified by its higher palladium content (Comp 3). The interval ends in wider quartz-pyrite veins and increased amounts of massive irregular calcite and anhydrite veins. Monzonite continues and is gradually increasing dark green propylitic mottled alteration hosting abundant fine grained disseminated pyrite dominating over early quartz veins mineralization (Comp 4). The hole ends in low-grade copper-gold mineralization.

Hole K-26-264 was drilled with HQ to 335 metres and NQ sized core and sampled on 2-metre intervals from half sawn core and drilled on 0° azimuth at a -90° dip to a depth of 650 metres.

After 27 metres of overburden the hole intersected post-mineralization Cretaceous sediments to 340 metres then a maroon-green hematite altered tectonic breccia to 345 metres and a propylitic altered fractured dark green porphyritic diorite hoisting finely disseminated pyrite and dismembered early pyrite-magnetite quartz veins to 379 metres.

This was followed by a sericite altered porphyritic dyke to 383 metres and a wide potassic and propylitic altered fault zone with vein hosted pyrite and dismembered early quartz veins to 401 metres. An unexpected, mineralized intersection of mottled maroon-green potassic and porphyritic monzonite was encountered to 442 metres (Comp 5 and 6) hosting both disseminated and quartz vein sulphides with thicker veins occurring at 412 metres, representing a new mineralized structure to follow-up. Dark green propylitic altered porphyritic monzodiorite continues to 473 metres that was crosscut by an orange potassic altered porphyritic late dyke to 482 metres.

A mineralized fractured propylitic altered green-orange monzonite continued to 538 metres (Comp 7 and 8) with mineralization hosted mostly in early quartz veins. Mineralization is truncated by a light grey-pink porphyritic late dyke to 547 metres.

A coherent sericite-chlorite altered pink to green to light tan monzonite continues to 584 metres hosting a quartz stockwork followed by a light tan to green porphyritic dyke to 602 metres and a weakly mineralized dacite dyke to 607 metres, where mineralization continues in a propylitic altered light tan to green monzonite continued to 623 metres, including elevated palladium values (Comp 9). Low-grade mineralization picks up again in coherent potassic altered locally salt and pepper textured monzodiorite with planer to irregular continuous quartz veins and lightly disseminated pyrite including elevated palladium values (Comps 10). The hole helps define the north potion of the Western Zone mineralized units and demonstrates the continuity of palladium enriched intervals correlated to Unit 2.

Hole K-26-346 was drilled with HQ to 150 metres and NQ sized core and sampled on 2-metre intervals from half sawn core and drilled on 170° azimuth at a -80° dip to a depth of 501 metres.

After 24 metres of overburden the hole intersected post-mineralization Cretaceous sediments to 377 metres then a tectonic breccia to 378 metres and a mineralized hematite altered maroon and light tan porphyritic monzonite to 409 metres, including two well mineralized intervals (Comp 12 and 13) hosted in dismembered early quartz stockwork. Mineralized monzonite is followed by a sericite altered light tan to medium grey mottled porphyritic late dyke to 414 metres. Mineralized monzonite continued on the other side of this dyke to the end of the hole and includes a two of mineralized intervals (Comps 14 and 15), including, a palladium enriched interval between 412 and 454 metres, consistent with Unit 2 and a well mineralized interval between 458 and 478 metres hosted in a coherent primary porphyry mineralization.

Section Summary: The drilling on Section 351325 E provided high-angle drill intersections that improve the geological and grade continuity in the Western Zone. The intersections demonstrate the continuity of Units 1 and 2, the persistence of palladium enrichment in Unit 2, a new mineralized structure in hole K-26-264, the up-dip extension of Unit 1 in K-26-346 and the expansion of low-grade below Unit 2 associated with Unit 16.

NorthWest is a copper-gold exploration and development company with a pipeline of advanced and early-stage projects in British Columbia, including Kwanika-Stardust, Lorraine-Top Cat and East Niv. With a robust portfolio in an established mining jurisdiction, NorthWest is well positioned to participate fully in strengthening global copper and gold markets.