Military Metals posts Maiden Inferred Resource Estimate at Trojarova Project, Slovakia
Military Metals Corp. [CSE: MILI; OTCQB: MILIF; FSE: QN90] reported the completion of a maiden Inferred Mineral Resource estimate (MRE) of 6.5 Mt at 1.02% Sb and 1.06 g/t Au for 67,000 tonnes (kt) of antimony and 222,000 ounces (koz) of gold at the wholly owned flagship Trojárová Project in Western Slovakia.
The resource estimate incorporated 53 diamond drill holes totaling 7,167 meters of drilling and 55 intervals of underground chip samples totaling 202 metres.
Historical MRE is now replaced by a modern MRE that is prepared in accordance with the 2014 CIM Standards (CIM, 2014) and the CIM Best Practice Guidelines of Mineral Resources and Reserves (2019)
Scott Eldridge, CEO, commented, “The maiden mineral resource estimate of the Trojárová Project firmly underpins the value of Military Metals. Following our 2025 confirmation drilling campaign Trojárová has emerged as the largest antimony resource in the European union that is defined by a modern regulatory standard, and among the largest antimony resources globally. At a time when the need for secure, domestically sourced critical minerals is more pressing than ever, these results strengthen the project’s potential importance to, and alignment with, the EU’s objective of building a dependable, home-grown supply of critical raw materials.”
The maiden Mineral Resource Estimate (MRE) incorporates all historical and modern drilling completed on the project, as well as historical underground sampling, comprising 53 diamond drill holes totaling 7,167 metres and 55 underground face chip sampling intervals totaling 202 metres.
Three historical drill holes without analytical results available were excluded. Six mineralization wireframes, each supported by a minimum of two drill holes, were manually built based on a 0.1% SbEq threshold. A minimum wireframe width of 2.0 metres was applied to all zones. Mineral Resources above the 0.8% SbEq cut-off were reported in four of the six mineralization wireframes.
Inferred Mineral Resources correspond to areas supported by at least two drill holes with nominal drill spacing of no more than 150 m. Classification boundaries were locally refined manually to reflect geological interpretation, grade continuity, and zone thickness.
The MRE is constrained within estimation domains meeting a 2.0 metres minimum mining width. A 50 m crown pillar was also excluded from the MRE.
Resource classification follows the CIM (2014) Definition Standards. Modeling and estimation were completed in Leapfrog Geo and Leapfrog Edge, and validation included database checks, wireframe-to-block volume comparisons, statistical reviews, and visual inspections on sections, plans, and longitudinal sections. Reporting assumes an antimony price of US $29,000 per tonne and a gold price of US$3,000/oz, with an effective date of April 6, 2026.
The average grade, minimum mining width and other results or assumptions above do not guarantee future production.
To date no significant mineralization has been intersected beyond the boundaries of the current Inferred Mineral Resource estimate. However, mineral exploration beyond these boundaries has also been limited. There is geological evidence of the mineralizing structure or other sympathetic structures continuing northward along strike within the boundaries of the Trojárová project.
Additional exploration along this corridor could identify targets for future drilling. Furthermore, the Inferred Mineral Resource is open to depth, where additional drilling has the potential to incorporate additional volume into future mineral resource estimates.
Discovered in the late 1970s, Trojárová was the focus of extensive surface and underground exploration over a 2 km strike length from 1983 to 1995, including 66 diamond drill holes for a total of 9,049 m and 1.7 km of underground workings. Efforts continued over the years as additional trenches were dug, and holes were drilled. Starting in 1990, underground development began, ultimately comprising a 300-metre-long adit connected to a 700-plus-metre-long drive in the footwall of the mineralized zone, with seven crosscuts into the mineralized zone for sampling.
These efforts culminated in a comprehensive study comprising drill logs, analyses, drill plans, maps and sections, deposit model studies, petrographic studies, metallurgical studies and more, now detailed in a multi-volume compendium of reports produced by the Slovak Geological Institute published in 1992.
The historical work carried out appears comprehensive, detailed and at a professional standard. The company considers this historical data relevant, as it will use it as a guide to plan future exploration programs and informs the Inferred Mineral Resource estimate. The company also considers the data to be reliable for these purposes.
The company completed a confirmation drilling campaign in the winter of 2025 to validate historical work. Seven diamond drill holes totaling 1,383 metres were drilled.
SLR is unaware of any environmental, permitting, legal, title, taxation, socio-political, marketing, or other relevant issues that could materially affect the Mineral Resource estimate.
A technical report will be prepared by Qualified Persons in accordance with the requirements of NI 43-101 and will be filed on SEDAR+ within 45 days.
The company is primarily engaged in the acquisition, exploration and development of mineral properties with a focus on antimony.